FRESNO CONTROLLER TROUBLESHOOTING
The controller screen can look normal while the yard stays dry
Start with the simplest possibilities: schedule, rain delay, seasonal setting, and station assignment. If those check out, the problem may be power, wiring, a solenoid, or a valveānot the controller itself.

Quick checks before replacing anything
Nothing runs
Check power, display messages, rain delay, master valve settings, and whether the program has both start times and watering days.
Only one zone fails
That usually points toward a station wire, splice, solenoid, valve, or hydraulic problem rather than a completely failed controller.

How we work through it
- Read the display. Note errors, rain delay, off mode, or missing programs.
- Run a manual station. See whether the problem affects every zone or only one.
- Check power and output. Test the transformer and station signal where appropriate.
- Trace the field side. Inspect wiring, splices, solenoids, and valves.
- Program and verify. Set current watering days and test normal operation.

Repair or replace?
A controller with a sound transformer and reliable station outputs may only need programming or wiring repair. Replacement makes more sense when hardware has failed, stations are insufficient, parts are unavailable, or smart scheduling provides a meaningful benefit.
Useful sources
Send a photo of the display
Call or text (559) 860-9071. Call or text the controller brand, model, error message, and which zones fail. See our repair services, FAQ hub, or main site.
