FRESNO SPRINKLER REPAIR
Find the real problem before replacing parts
A wet valve box, dry patch, weak zone, or controller error can have several causes. We test the system, isolate the failure, and explain the repair before unnecessary parts get replaced.

Common sprinkler problems we repair
- Broken, tilted, clogged, or leaking sprinkler heads
- Underground pipe and fitting leaks
- Valves that stick, leak, or fail to open
- One zone not working or two zones running together
- Low pressure, misting, overspray, and uneven coverage
- Controller, timer, wiring, and solenoid problems
- Drip-irrigation leaks and damaged emitters

How the repair process works
- Listen and inspect. We start with the symptoms, controller settings, valve behavior, and visible damage.
- Test by zone. Pressure, coverage, wiring, and valve response help isolate the cause.
- Repair and adjust. The failed component is repaired or replaced, then heads and nozzles are aligned.
- Run the system again. We check the repaired zone and look for related problems before wrapping up.
If water will not shut off, use our emergency shutoff guide and call us.

Tell us what the system is doing
Call or text (559) 860-9071. Photos and a short description—such as which zone is affected and whether the leak continues when the controller is off—can help us understand the problem faster.
Browse more answers in the Fresno sprinkler FAQs, or visit the main Sprinkler Master website.

